Parts for Nixie 6.7 
Capacitors                                                       
1 - 1,000uF, 35V  (electrolytic)                   
2 - 100uF, 25V    (electrolytic)    
3 - .01uF (103)     (ceramic)                     
1 - 10uF, 6.3        (electrolytic)                  
2 - 2.2uF, 350V   (electrolytic) 

Diodes                                              
2 - 1N4007                                      
4 - 1N4001 

IC Sockets 
1 - 16 pin 
1 - 28 pin   

Miscellaneous  
1 - Piezo Buzzer 
4 - push buttons   
1 - Rectifier Bridge   25V #512-2KBP01M 
1 - 5V regulator        7805 
1 - Heat sink kit 
1 - solder-in fuse 
1 - Red LED 5mm 
1 - Green LED 5mm 
6 - RGB LEDs 5mm 
5 - neon lamp (4 colons, 1 indicator) 
1 - four pin jumper 
1 - Transformer, 120V/240V prim., 6.3 V secondaries 
1 - AC Wires
2 - connections ports & (1) wire bus 

Transistors 
8 - MPSA44	(NPN)			     
7 - MPSA92	(PNP)                            
2 - 2N3904    (NPN)           

Resistors  (1/4 Watt, unless otherwise noted)       
6 - 47K                   
3 - 10K 		              
5 - 2.2K 			               
2 - 220K                                     
3 - 1K                                  
1 - 1M                                 
8 - 100K             
3 - 470R                        
1 - 220R, ½ Watt               
10 - 33K           
7 - 470K   
4 - 100R
4 - 120K

Chips
1 - PIC18f26k20 (preprogrammed microcontroller)
1 - 74141 or equivalent high voltage 4 to 10 decoder     

Battery backup(optional)
1 - 1000uF, 6.3V capacitor electrolytic
1 - nine volt battery clip
1 - 5VDC relay
2 - 1N4001 diode
1 -10K resistor
1 - 78L05 regulator
1 - LED  blue 3mm