| Oscilloscopeclocknixiecrt.com Email: howchon@hotmail.com |
 |
| Oscilloscope & Nixie clocks & kits Please see my youtube videos |
|
The (newest, raster style) OSC7.0 Oscilloscope clock kit |
|||
|
The new design raster style kit is a professionally made pc board and the components to populate it, including the ICs and the preprogrammed ESP32 module written with my firmware and the toroidal transformer. I supply the instructions for assembly and a parts list (in digital format) with the board and components. Email me at: howchon@hotmail.com. Click the links below to open the files individually. Price = $130 + shipping for the kit & components. I have some crts available at varying prices according to scarcity. Some CRT types that I have used with this board are: DG7-6, 2AP1, 2BP1, 6Lo1i, 3RP1 and 3BP1. |
|||
|
The OSC7.0 Board |
The DG7-6 CRT driven by OSC7.0 |
||
 |
|
||
| Buy the kit now for $130 + shipping (calculated at checkout) | |||
| The OSC7.0 board connects to U.S.(120VAC) or other (240VAC), and it will drive many relatively low-voltage crts such as 2BP1, 2AP1, DG7-6, 6Lo1i and others. | |||
| List of CRT pinouts for the kit. | |||
| Assembly Instructions for OSC7.0 | |
||
| Parts List for OSC7.0 | |||
| Instructions for OSC7.0 | |||
| 6Loi1 specs | |||
| OSC7.0Board.jpg(silkscreen layer) | |||
| OSC7.0Board(scan) | |||
| Youtube demonstrating some functions | |||
| Low voltage transformer drawing | |||
| jumper.jpg | |||
| Buy the upgraded OSC7.1 kit to drive 5" (and even larger) CRTs. $195 + shipping (calculated at checkout) | |||
| Assembly Instructions for OSC7.1 |  |
||
| Parts List for OSC7.1 | |||
| Instructions for OSC7.1 | |||
| HV Transformer drawing | |||
| OSC7.1Board.jpg | |||
| Youtube demonstrating some functions | |||
|
The (original, vector style) OSC4.4 Oscilloscope clock kit |
|||
| An
unsolicited testimonial: "Howard, Wanted to send you a few pictures of the evolving project. Reduced Rfilament to 1ohm to realize a ~6.2VAC heater voltage. Focus and intensity of the CRT looks good. Energized the native oscilloscope circuit to illuminate the 'scope display grid. Very happy with how this is coming together. I wanted to thank you for all your effort and great execution on this. Very impressive that you single handedly integrated high voltage electronics, consumer-grade AC power conversion circuits, analog amp design, data converters, PIC programming, user experience design using a 3 button interface, submicron GPS chipset programming and system integration all at the same time. Not to mention being available to answer questions during the build! Let me know if there's anything I can do to help with your future goals, projects, and endeavors. Brian" Brian's build can be seen here. |
|||
| The original vector style kit is a professionally made pc board and the components to populate it, including the ICs and the preprogrammed PIC microcontroller written with my firmware. I supply the instructions for assembly and a parts list (in digital format) with the board and components. Email me at: howchon@hotmail.com. Click the links below to open the files individually. I have some crts available at varying prices according to scarcity. Some CRT types that I have used with this board are: DG7-32, DG7-6, 2AP1, 2BP1, LB-8, 6Loi1, 50HB1, 7SJ33J, 3SP1, B7S2, LO-247, 3GP1, 3Lo1i, 1EP1, 3EP1, 5LO38, DG7-52. Click here for a great review of the OSC4.4 kit! | |||
|
The OSC4.4 Board |
The Kit |
||
 |
|
||
| Buy the kit now for $100 + shipping (calculated at checkout) | |||
| The OSC4.4 board connects to U.S.(120VAC) or other (240VAC), and it will drive most relatively low-voltage crts such as 2BP1, 2AP1, DG7-32 and others. | |||
| Assembly Instructions for OSC4.4 |
Click
here to visit Sphere Research to
find many types of CRTs and other
vintage electronics for sale. Many of the crts they sell will work with
the kit.
|
||
| Parts List for OSC4.4 | |||
| Instructions for OSC4.4 (.docx) | |||
| 6Loi1 specs | |||
| CRT Data 2AP1-7JP1 | |||
| DG7-32 Data | |||
| OSC4.4Board.jpg | |||
| British CRTs Data | |||
| Instruction for OSC4.2 (older version) (.pdf) | |||
| OSC4.2 (original version) board Jumper | |||
| National Union 2002 crt pinout | |||
| Part 1 of OSC4.3 build video | |||
| Buy the basic OSC4.5 upgraded version of OSC4.4 for $125 + shipping (calculated at checkout) This kit will drive larger CRTs, up to 5" types and even 7" such as the 5UP1, 5DEP1 and 7VP1. It needs a high voltage transformer with approximately 400VAC ouput, not included with the basic kit, but may be purchased below with the kit and /or options. | |||
| The OSC4.5 board connects to U.S.(120VAC) or other (240VAC), and it will drive most relatively high-voltage crts such as 5UP1, 5DEP1, 5CP1, 7VP1 and others. | |||
| Assembly Instructions for OSC4.5 | |||
| Parts List for OSC4.5 | |||
|
Scope Clocks built using the original OSC4.4 vector kit ! |
|||
 |
 |
||
| The clock above was built using the kit. The custom case and mount were made by the builder. | This is another clock built using the kit board. The builder used a 3" crt and custom built the mounting block. | ||
 |
 |
||
| This is another kit built using a 6Lo1i with battery backup. | A very unique design from Bad Dog Designs built using the kit and an ECG monitor. | ||
 |
 |
||
| This is another view of the kit built inside the ECG monitor - beautiful ! | A 3SP11 in custom case built from the kit by a friend. | ||
 |
 |
||
| A kit build running the alternative program by oz2cpu | A really cool kit build in a scope chassis. | ||
 |
 |
||
| Very unique build using the 3RP1 crt. | Very original build using vintage shoe polisher as housing ! | ||
 |
 |
||
| A build from the kit (left) next to the 6Lo1i scope clock, built by a friend in Japan. | Really radical build by a friend from out west; calls to mind the science fiction of Jules Verne ! | ||
 |
 |
||
| A mike stand build ! | Some heavy metal ! | ||
|
 |
||
| A build in another type of vintage enclosure ! | Using 50HB1 CRT type ! | ||
|
 |
||
| Very unique stainless & wood stand ! | Very elegant base & really nice CRT stand ! | ||
|
 |
||
| A really artistic build ! | |||
|
|||
| This one makes me think of "Metropolis" | |||
|
 |
||
| A very original build in a bird house ! | |||
|
 |
||
| Minions ! | Super retro design ! | ||
|
 |
||
| Awesome design by Daniel Horner from the U.K ! | |||
|
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
| Kit in a Dumont 208-B (circa 1947) ! | This was built using the customized OSC4.5 board for 5" CRTs | ||
 |
 |
||
| Very unique build with a 1CP1 CRT! | Looks like the CRT is water cooled : D | ||
 |
 |
||
| Excellent build using the complete kit with enclosure for a DG7-6. | Another excellent build from the complete kit with a 6Lo1i. | ||
 |
 |
||
| Very unique and artistic build! | |||
 |
 |
||
| Another excellent re-purposed scope! | This is a classic EICO! | ||
 |
 |
||
| Yet another successful kit build! | ...and another! | ||
 |
 |
||
| Another great build in a classic 'scope! | |||
 |
 |
||
| A great example of a build from the OSC7.0 kit! | With custom built natural wood base! | ||
 |
 |
||
| OSC4.4 kit build using 3WP1 | Very neat enclosure! | ||
 |
 |
||
| The builder used mounting clips to retain the CRT | |||
 |
 |
||
| Really nice build with a universal joint! | |||
 |
|||
| OSC7.0 in a classic oscilloscope. | On top of a classic Philco. | ||
 |
 |
||
| Another OSC7.0 build! | Very neat idea and unique! DG7-32 CRT w/ OSC7.0 kit. | ||
 |
 |
||
| An OSC7.1 build! Using a 5UP1! | Really neat! | ||
 |
 |
||
| The back of the previously pictured build above, clever! | A steampunk style design, on OSC4.5, unique! | ||
 |
 |
||
| Built in an antique trolley clock! | Vintage! | ||
 |
 |
||
| Another cool OSC4.4 build! | And another cool OSC7.0 kit build! | ||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
| A really neat build from OSC7.1 kit! | Looks great on a D13-42 CRT! | ||
|
 |
||
| The same OSC7.1 kit build on a slideshow screen. | Well done! | ||
 |
 |
||
| And another successful OSC4.5 build! | The slight bend in the display is likely caused by a little EMI. | ||
 |
 |
||
| An elegant OSC7.0 build. | Custom created with intricate woodburning. | ||
 |
 |
||
| An OSC7.1 build on a 5BP1 | Very neat! | ||
 |
 |
||
| oscilloscope case. | Always a good idea! | ||
 |
 |
||
| OSC7.0 on a DG7-6 | Very neat work! | ||
 |
|||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
 |
 |
||
.jpg) |
.jpg) |
||
| This OSC4.5 build in an old oscilloscope is neat! | Another OSC7.1 scope clock homed! | ||
| OSC7.0 build on a 2BP1 CRT. | A build in a classic box. | ||
| In a classic box. | Neatly done! | ||
| Another OSC4.4 build! | Lost in Space : ) | ||
